My mx922 printer fails to print 8.5"x11" paper on a consistent basis. Half the time it gives error message "no paper in upper tray". How do I instruct printer to always feed larger paper from the lower tray. I did not recieve manual in box nor have I been able to download manual.
↧
mx922 printer fails to print 8.5"x11" paper (1/2 of the time) due to "no paper in upper tray"
↧
mg5550 prints out ok. If I scan I get this error 5,157,69 caused by your software. Using paint works
I am running Window 7 32 bit version
I am using a cannon MG5550 it prints out fine.
When I try and scan I get the follow error message
error 5,157,69
This error has occurred resently
This appears to be caused by your software but maybe possibly be due to an updates from Microsoft that has caused the problem.
I can use Microsoft paint and it works fine without a problem at all
So I can use paint as work around to scan the stuff I need for now.
But would be nice to get it working correctly again using cannon software.
Can you help
↧
↧
My Canon Pixma 922 prints from Word or Outlook, but won't print from the web or Adobe. The message
My Canon Pixma 922 prints from Word and OUtlook, but won't print from the web. It claims "printer offline" when it is clearly online.
↧
How Scan **bleep** using cannon mx922
↧
mx920 printer error code C000
I cannot fix my mx920 printer with error code C000 by turning off the printer and disconnecting the power source. What should I do to fix it?
↧
↧
Canon MX715
Hello, I'm having some troubles with my printer Canon pixma MX 715.
I had bought it around 3 years ago, it was working fine until I left the unit alone in disuse for approx 4 months. When I went to use it again, ofcourse my nozzles were clogged and I recieved the printhead error message.
I bought a new printhead QY6 - 0080, for £60, approx $90-100. I didnt have any other errors other than to replace the printhead. Once i removed and replaced the old printhead with the new one, it all seemed to be registering fine.
I bought 2 new sets of ink (XL) - I went to run a 'nozzle check' and the machines starts moving. The noises of the printhead moving back and forth indicate something is happening; However as it was printing, blank pages came out, with no traces of ink on the paper.
I ran 'clean' and tried again, still nothing, even though the ink levels in the cartridges was dropping.
I than tried 'deep clean', twice, still nothing printed on the pages (With brand new sealed printhead and cartridges)
I did a hard reset - following a video on youtube (hold down cancel button, then press & hold 'on', then press cancel buttons five times - made some noises, still nothing being printed)
Ran 'reset' option via printer LCD, still nothing
I took out the printhead and inks, and did a nozzle clean on the printhead (ink seems to travel through printhead fine as alot of ink came when soaking printhead in water) reinserted clean and dried printhead and inserted inks - still nothing.
Ran 'auto align' to see if it is something mechanical - 'auto align' error display on LCD - just says 'refer to manual - 
'
ran manual align - operation didnt come up with any errors, but still nothing printed on the paper, still blank.
uninstalled, cleaned registry (ccleaner) and reinstalled program (win 10 x64) - still nothing being printed although communicating via lan and wifi fine.
Restarted 'printer spooling' in 'services.msc', restarted, stopped and started. Still nothing being printed.
Tried to run a photocopy, still nothing printed.
Ran 'clean' and 'deep clean' again with intervals as to not overheat the printhead - still nothing, all inks are now emptied (2 XL sets)
Cleaned 'waste ink' sponges seated on the right in the rubber gaskets - still nothing.
I AM BEWILDERED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Any suggestions Canon?
Thanks!
↧
my canon mx430 will not copy
↧
Does the MX922 All/in/one keep a log report of all sent faxes?
I need to recover the transmission log of a fax I sent from my MX922. Is there a history report kept for all faxes sent? A prompt response would be appreciated. Thank you
Mike
↧
Hi, I am getting error code 2, 156, 50 with my new 3650 scanner. It is warming up
Hi, I am getting error 2, 156, 50 when trying to use my new MG3650 scanner. Clearly the scanner is warming up but the message refers to lack of USB or power connectivity both of which are hooked up. (Printing OK). Do we have an answer pls?? Clearly this is a fairly common issue but I am yet to find an answer. Thank you.
↧
↧
I have an error message B200 on my Pixma MG 5320. What does it mean and what do I have to do?
I have an error message B200 on my Pixma MG5320. What does it mean and what do I have to do?
↧
I have a can on MX410 printer,fax,scanner and it says it is turner off.
↧
MX922 ADF Not Scanning Anything! Please help!
No matter what I've tried so far it will not pull dopcuments into the feeder. It says Please wait monetarily then does nothing. Here's a link to a minute long video showing this. Thanks for any help!
Video Link: https://www.youtube.com/watch?v=HuxB6yyICg8
↧
I want to erase all memory from my Pixma MX922 before I trade it in. How can I do that?
↧
↧
Canon PIXMA MG3620 Won't connect Wirelessly to PC
OS: Windows 10
Wireless internet
Canon PIXMA MG3620
I only purchased it as a scanner, and do not have it set up to print. It's been working for a few months, but sometimes it stops connecting to the wireless for no reason. Usually rebooting my PC, or the scanner will fix this.
This time it won't and I don't know what to do.
I've rebooted my computer and tried multiple times to pair my scanner with the wireless, but it doesn't seem to be properly connecting to my PC.
I get the error "Cannot communicate with scanner for these reasons:
-scanner is turned off.
-If using LAN connection, it is disconnected from LAN
(etc, etc)
Code:5,157,69
On the top of the scanner the Power button is lit (green), the wifi button is lit (blue) and the 8.5"x11" plain paper button is lit (green).
What do I need to do to get the scanner and computer connected again?
↧
Faint PDF
Lately when I scan a document and save it as a PDF file the print is so faint I can hardly read it. When I print it it is still faint and barely readable. I haven't messed with any settings or changed anything.
If anyone can help me fix this, I'd appreciate it.
I am using Canon Pixma MG2120.
↧
Pixma MG5320 Web Interface/Web Server
I am using Linux and can print to the 5320 just fine. However, since the disk based drivers don't support Linux I was hoping the Pixma series would support scanning and so on from the web interface like the HP printers do.
In my home router I selected a static IP address so it doesn't periodically change on me. I can use the web browser to open the assigned web address and I see a Canon Network Configuration page. On the bottom-right hand side of the web page is an "Advanced" button. Selecting "Advanced" brings up a "Top Page" with Printer Information and Status areas. In addition to "Top Page" there are other selections from a left-hand side menu "Network Settings, Other Settings and Admin Password."
Question: Am I missing something? Is there another hidden web page somewhere? There are some features that can be configured but there is no scanner interface as the HP printers have. This is important since I have no software to control the scanner. This limitation would seem to preclude using Canon printers for my Linux PC.
↧
Can my Pixma MX870 printer scan if there are no ink cartridges installed?
Is there a way to get around the no scan issue and continue scanning to my computer until I can purchase ink replacement?
↧
↧
Which Canon service tools are recommended for MG5550 and MG6450?
I have both of these printers nad they both have the warning of pads being full. But I cannot get either printer to respond to service tool v3400 or v3900. Any ideas welcome
↧
Canon MX922 printing red instead of hot pink
My Canon MX922 printer, keeps printing red color instead of the hot pink on the screen. I have tried cleaning and adjusting the print nozzles to no avail. I do not know what else to try.
↧
Help
Trying to print from my laptop and get the code "the printer is performing another operation"
↧